Toshiba SATELLITE E105 manual CCD Board and MIC Replacement Procedures

4.18 CCD Board and MIC 4 Replacement Procedures

4.18 CCD Board and MIC

Removing the CCD Board and MIC

Remove the FL inverter board according to the following procedures and Figure 4-33.

1.Disconnect the CCD cable from the CCD module connector and remove the CCD board.

2.Lift the MIC from the display rear cover.

MIC

CCD board

CCD board cable

Figure 4-33 Removing the CCD board and MIC

4-48 Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual