Error! Style not defined. Error! Style not defined. | 4 Replacement Procedures |
Disassembling the ODD Drive
NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails.
Disassemble the ODD drive according to the following procedures and Figure
1.Remove two M2x4 black flat head screws securing the ODD bracket.
2.Remove the bracket.
3.Remove the ODD bezel.
ODD bezel
ODD BRKT
M2x4 black flat head screw
ODD driver
Figure 4-14 Removing the bracket from the ODD drive
Assembling the ODD Drive
Assemble the ODD drive according to the following procedures and Figure
1.Seat the ODD bezel on the ODD drive.
2.Seat the bracket and secure it with two M2x4 black flat head screws.
Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual |
