Click Apply Action | Extron electronic IPL T S6, IPL T S4, IPL T S1

Software Setup, cont’d

3. Enter a unique schedule name.

4. Select the schedule times.

5. Click Next.

6. Click Actions.

7. Select a subject port (device).

8. Select an available option (action).

9. Click Apply Action.

3-14 IPL T S Series Interfaces • Software Setup

Image 34

Extron electronic IPL T S6, IPL T S4, IPL T S1, IPL T S2 setup guide Click Apply Action

Contents

IPL T S Series Interfaces Precautions Safety Instructions English 安全须知中文 Page Table of Contents Table of Contents, cont’d One IPL T S Series Interfaces About this Manual IntroductionIPL T S Series Products IPL T S1 Introduction, cont’d Global Configurator System requirements Installing Global ConfiguratorClick the Global Configurator icon Click the Download GCSWxxxxx.exe button Introduction, cont’d Two Hardware Setup Front Panel Rear Panel Hardware Setup, cont’d Power Connection Local Area Network LAN Connection RJ-45 Connector Straight-through Cable Serial Device Connection Pin D connector Hardware Setup, cont’dCaptive screw connector IPL T S6 Hardware Setup, cont’d Three Step one download device drivers Software SetupCreating a Global Configurator Project File Click the Add Driver Subscriptions button Click the right arrow Subscribe button Software Setup, cont’d Step two create a new project IPL T S Series Interfaces Software Setup Click Edit Add Device Step three add a deviceClick Make this device a GlobalViewer Host if desired Click Auto Configure IP Address Step four define the location of the new device Step five save the new Global Configurator file Step six configure contacts Software Setup, cont’d Configuring a New DeviceClick Edit Contact Manager Step seven configure e-mail Click Edit Email Manager Step eight assign device drivers Driver Configuration tab opensClick Add Driver Step nine set scheduled actions and e-mail deliveries Click Apply Action IPL T S Series Interfaces Software Setup Click Apply Email/Contacts Step ten set monitored conditions Click Conditions Click Apply Condition Building and Uploading a GC File Step eleven build the Global Configurator fileApply Email/Contacts Step twelve upload the Global Configurator file Click Tools Change Device Settings Step thirteen change device settings if desiredSet Mail Server..., Set Gateway..., Set Subnet Mask..., etc Software Setup, cont’d Launching the GlobalViewer Interface Step fourteen launch GlobalViewer IPL T S Series Interfaces Software Setup Extron’s Warranty USA, Canada, South America Japan Central America Setup Guide Checklist Extron USA East