Mode Functions
Operation
NOAA* All Hazards Radio Channels
•
You can use your microTALK® radio to listen to NOAA All Hazards Radio channels transmitting in your area.
Lock/Mode Button To listen to All Hazards Radio channels: 1. Press the Lock/Mode button until the WX
|
|
|
|
|
|
| Introduction | Operation | Customer Assistance | Warranty |
|
Voice Activated Transmit (VOX)
•
In VOX mode, your microTALK® radio can be used
Hazards Radio Icon
(All Hazards Radio) icon, the currently selected All Hazards Radio channel, and signal strength are displayed.
Lock/Mode Button To turn VOX mode on or off:
1. Press the Lock/Mode button until the VOX |
icon flashes on the display. The current on |
2. Use the Channel Up or Channel Down button to change All Hazards Radio channels.
3. WX (All Hazards Radio) icon will continue to
|
| or off setting is displayed. |
|
| 2. Press the Channel Up or Channel Down |
VOX Icon | ||
|
| button to turn VOX on or off. |
Channel Buttons
be displayed when All Hazards Radio is on. Choose one of the following:
3. Choose one of the following: |
a. Press the Lock/Mode button to enter the
a. Press the Lock/Mode button to proceed to other functions.
b. Press the Hi•Low/Enter button to exit All Hazards Radio channel mode and return to Standby mode.
*National Oceanographic and Atmospheric Administration
Channel Buttons
Lock/Mode Button
VOX Sensitivity Level
Channel Buttons
selected on or off setting and proceed to other functions.
b. Press the Hi•Low/Enter button to enter the selected on or off setting and return to Standby mode.
To set VOX sensitivity:
1.Press the Lock/Mode button until the VOX icon flashes and the current sensitivity level is displayed.
The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01 being the least sensitive level.
2.Press the Channel Up or Channel Down button to change the setting.
3.Choose one of the following:
10 English
a. Press the Lock/Mode button to enter the selected setting and proceed to other functions.
b. Press the Hi•Low/Enter button to enter the selected setting and return to Standby mode.
Nothing comes close to a Cobra® 11
