Cobra Electronics PR 945 operating instructions Calling Another Person, Talking to Another Person

Models: PR 945

1 19
Download 19 pages 57.78 Kb
Page 4
Image 4

O P E R AT I O N

ENGLISH

ENGLISH

O P E R AT I O N

CALL

Button

Calling Another Person

To alert another person that you are calling:

1.Press and release the CALL button. The other person will hear a two (2) second ringing tone. (See page 11 on how to select between ten (10) call tone settings.)

 

To temporarily turn Off Auto Squelch:

LIGHT/

1. Press the LIGHT/MAX RANGE button less than five (5)

seconds.

MAX RANGE

Button

If you hear two (2) beeps, you have turned the Maximum

Range Extender On (see below).

You cannot send or receive transmissions during the two

(2) second call tone.

To turn Maximum Range Extender On:

1. Press and hold the LIGHT/MAX RANGE button for at

least five (5) seconds until you hear two (2) beeps

TALK

Button

Talking to Another Person

1.

Press and hold the TALK button.

2.

With the microphone about two (2) inches (5 cm)

 

from your mouth, speak in a normal voice.

3.

Release the button when you’re finished talking and

which indicates the Maximum Range Extender is On.

To turn Maximum Range Extender Off:

1.Press and release the LIGHT/MAX RANGE button or change channels.

ON/OFF

VOLUME

Switch

listen for a response. You cannot receive incoming calls

while pressing the TALK button.

Listening for a Response

When you are finished talking:

1.Release the TALK button to receive incoming transmissions. Your microTALK® is always in listening mode while the TALK button is not pressed.

2.Adjust the volume by rotating the ON-OFF/VOLUME switch.

LOCK

Button

Using the Lock Function

The Lock function locks the CHANNEL, MODE and HI/LOW POWER buttons to prevent accidental operation.

To use the Lock function:

1. While in Standby mode, press and hold the LOCK

button for one (1) second. The Lock icon will blink

when the radio is locked. Buttons that are NOT locked

are the CALL, LOCK, LIGHT/MAX RANGE, TALK buttons,

and ON-OFF/VOLUME switch which are all fully

functional while the radio is locked.

 

Illuminating the Display

 

1. Press and release the LIGHT/MAX RANGE button to

LIGHT/

illuminate the display for ten (10) seconds.

Auto Squelch/Maximum Range

MAX RANGE

Button

Your microTALK® radio is equipped with Auto Squelch,

 

which automatically shuts Off weak transmissions and

 

unwanted noise due to terrain, conditions, or if you’ve

 

reached your maximum range limit.

You can temporarily turn Off Auto Squelch or turn On Maximum Range Extender, allowing all signals to be received and extending the maximum range of your radio.

5

External

Microphone

Speaker

Speaker/

Microphone

Jack

2. To “unlock” buttons, press and release the LOCK

button again. The Lock icon disappears and all buttons

will be unlocked.

External Speaker/Microphone Jack

Your microTALK® radio can be fitted with an external speaker/microphone, freeing your hands for other tasks. (See page 16 for optional accessories.)

To attach an external speaker/microphone:

1.Open the SPKR/MIC tab on top of the radio.

2.Insert the plug into the SPKR/MIC jack.

(CAUTION: Do not use an external speaker/ microphone with common ground circuits with this radio. Damage can result. We recommend using only Cobra® authorized accessories.)

6

Page 4
Image 4
Cobra Electronics PR 945 operating instructions Calling Another Person, Talking to Another Person, Listening for a Response