O P E R AT I O N • A D VA N C E D F E AT U R E S | ENGLISH |
ENGLISH | O P E R AT I O N |
Using the MODE button
The MODE button allows you to use and program the various functions of your microTALK® radio. If you press and hold the MODE button, the LCD will cycle through the different functions.
3.Press and release the ENTER button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.
Setting the VOX
Sensitivity Level
Programming Memory
Locations
Your microTALK® radio has 10 memory locations
5. Press the MODE 
button again to 
store the main 
channel in memory 
and move to 
privacy code selection. The privacy code number begins flashing and the Memory
MODE button
You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. To set
the sensitivity:
1. Push the MODE |
button until the |
Memory icon and |
the memory |
location flashes. |
MODE |
button |
icon continues to flash.
6. Select the privacy code |
wish to store by pushing the CHANNEL |
SELECT button up or down. |
Using VOX Mode
1. Press the MODE
In VOX mode, your microTALK® can be used
1.Press the MODE button until the VOX icon flashes and the current setting ("on" or "off") is displayed.
2.Push the CHANNEL SELECT button up or down to turn VOX mode on or off.
CHANNEL 
SELECT button
button until the VOX
icon flashes and the number for the current sensitivity level is displayed
next to the letter L (level 5 = most sensitive, level 1 = least sensitive).
2.Push the CHANNEL SELECT button up or down to change the setting.
3.Press and release the ENTER button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.
ENTER button 
MODE button
2. Select the memory | CHANNEL | |
location you wish | ||
SELECT | ||
to change by | button | |
pushing the |
| |
CHANNEL SELECT |
| |
button up or down. |
|
3.Press and release the MODE button again. The Memory icon and the main channel number will flash.
4.Select the main channel you wish to store by pushing the CHANNEL SELECT button up or down.
button to program
your selection. You may also press the
TALK button to
transmit your selected channel and privacy code, which will be stored into the memory location you are using. (NOTE: To “unprogram” a memory location you programmed previously, select 00 for both the main channel and privacy code in steps 4 through 6.)
8.Press and release the ENTER button to return to Standby mode at your new memory location, or press and release the
MODE button to save the memory location and proceed to other functions.
7 | 8 |
