CALL button
Vibrate + Ring

O P E R AT I O N

ENGLISH

ENGLISH

O P E R AT I O N

To scan memory locations (continued):

b)Push the CHANNEL SELECT button up or down to resume scanning memory locations.

CHANNEL SELECT button

c)Press the MODE button to proceed to other functions.

If you do not press any button within

10 seconds, the radio will automatically resume scanning memory locations. (NOTE: If you want to reduce the number of memory locations being scanned you need to ”unprogram“ all unwanted locations by changing both the main channel and privacy code to 00. See Programming Memory Locations, page 8.)

1.Press the MODE button until the Ring Setting icon flashes and the current

setting (Vibrate + Ring, Vibrate Only, or Ring Only) is displayed.

Vibrate Only

Ring Only

2.Push the CHANNEL SELECT button up or down to change the ring setting.

3.Press and release the ENTER button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.

Turning Roger Beep Off and On

2.Push the CHANNEL SELECT button up or down to turn Roger Beep on or off.

3.To enter the new setting you can press and release the ENTER button, or press the MODE button to enter the new setting and proceed to other functions.

ENTER button

Turning Keystroke Tones Off and On

With Keystroke Tones turned on, your unit will sound beeps each time you press a button or change a setting. To change Keystroke Tones:

1. Press and hold the ENTER button for

5 seconds to turn keystroke tones off. A

double beep will sound and the Beep icon

Changing Call Tone Settings

You can choose between ten different call tone settings to transmit a unique call alert. To select a call tone setting:

1.With the power

turned off, press

and hold the CALL button as you turn the power on. The number of the

current call tone setting will display and the tone will sound for one second, after releasing the call button.

2.Push the CHANNEL SELECT button up or down to hear the other call tone settings.

3.With the number of your desired call tone setting displayed, press and release the TALK button or ENTER button. Your selection will be entered.

Using Call Tones

and VibrAlert

Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently, or both. To change ring settings:

With Roger Beep turned on, your listener will hear an audible tone when you release the TALK button. To change Roger Beep mode:

1.Press the MODE button until the Roger Beep icon flashes and the current setting (“on” or “off”) is displayed.

MODE

button

will disappear.

2. To turn keystroke tones back on, press and

hold the ENTER button for 5 seconds again.

A single beep will sound and the Beep icon

will appear. (NOTE: The unit must not

be in Lock mode during these steps.)

 

ENTER

TALK button

button

 

4.If no buttons are pushed for 15 seconds, the unit will automatically enter the last call tone pattern that was displayed.

11

12

Page 7
Image 7
Cobra Electronics PR 950 DX Turning Roger Beep Off and On, Turning Keystroke Tones Off and On, Changing Call Tone Settings