COBY electronic TF-TV3207 TV Function, Basic Operation, System Setup Menu, Picture Options Menu

TV FUNCTION

Basic Operation

1.Prepare the antenna and power connections (see the Getting Started section for details).

2.Press to turn the TV on.

3.Set your TV to the display the desired signal.

•Press to change between Digital TV tuning (ATSC) or Analog TV tuning (NTSC).

•Press to change between AV Input or Output modes (Component 1, Component 2, AV Out, etc.). You should see the desired signal on-screen.

4.Press or to change the channel, or use the numeric keypad on the remote control to input a channel number directly.

Prior to viewing over-the-air or cable/satellite television, it is recommended that you set

the television to auto-scan for available station channels. To auto-scan, press to enter the System Setup Menu, and then select “Channel > Auto Program”.

System Setup Menu

Access the System Setup Menu to adjust the inter- nal options and features of your TV.

1. Press . The System Setup Menu will appear on-screen.

2. Use the Navigation keypad ( or ) to select a setup menu category. Press to enter the selected setup menu.

• With a setup menu, press or to select (highlight) a desired option. Press to confirm the selection.

• Press or to adjust an option.

3.Press to return to a previous menu and to exit the System Setup Menu.

Picture Options Menu

Item	Description
Mode	Select a Picture Mode preset (User, Standard, Movie, Sports)
Brightness	Adjust the brightness of the display.
Contrast	Adjust the contrast of the display.
Saturation	Adjust the color saturation of the display.
Tint	Adjust the tint of the display.
Sharpness	ATV Mode only: Adjust the sharpness of the display.
Noise Reduce	ATV Mode only: Select the Noise Reduction mode (Off, Lower,
	Middle, Strong).
Color Temp.	Adjust the color temperature of the display.

Page 18 Coby Electronics Corporation