Cable Connections

￿a￿￿e ￿￿nne￿ti￿ns

Figure. Cable connections

Set the unit to the relative input mode to enable the signal pass.

External Moniter

Amplifier equipped with a Dolby Pro Logic Surround

 

 

VIDEO-2 AUDIO-R AUDIO-L

VIDEO-OUT AUDIO-R

AUDIO-L

 

 

HDMI-2

HDMI-1

Y

Pb

Pr

VIDEO-1 AUDIO-R

AUDIO-L

S-VIDEO

OPTICAL

Antenna/Power Connection

1.Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CATV net. You can use 75 Ohm coaxial cable to connect outdoor antenna.

2.Insert one end of the supplied power cord to the player’s power jack and the other end to the 110-240V AC wall outlet.

Compoent Input (Y Cb/Pb Cr/Pr)

The component port is capable of accepting high-definition signals from standard video sources (e.g., cable/satellite boxes, DVD players, VCRs, etc.)

1.Connect the Y/Pb/Pr port by the component cable (not supplied) to input the video signal.

2.Connect “AUDIO-L” ”AUDIO-R” port by the supply AV cable to input the audio signal.

The red and the white plug of the AV cable is for the audio conneciton and the yellow plug for the video connection.

7

Cable Connections

Figure. Cable connections

S-Video Input

The S-Video port is capable of accepting signals from standard video sources (e.g., cable/satellite boxes, DVD players, VCRs, etc.)

1.Connect the S-Video port by the S-Video cable(not supplied) to input the video signal.

2.Connect the AUDIO-L/R port by the supply AV cable to input the audio signal.

AV Input/Output

The CVBS port is capable of accepting signals from standard video sources(e.g., cable/satellite boxes, DVD players, VCRs, etc.)

AV Input - 1. Connect the VIDEO-1/2 port by the supplied AV cable to input the video signal.

2.Connect the AUDIO-L/R port by the supplied AV cable to input the audio signal. AV Output - 1. Connect the VIDEO-OUT port by the supplied AV cable to output the video signal.

2.Connect the AUDIO-L/R port by the supplied AV cable to output the audio signal.

OPTICAL Output - Digital Audio Output Connector

When MPEG audio or Dolby Digital audio is played, Dolby Digital bitstream or MPEG audio bitstream is sent to the player’s digital audio output connector. When the player is connected to a Dolby or MPEG audio decorder via this output socket, you can enjoy theater-quality audio in your home. An optical audio cable is required when a Dolby Digital decoder or MPEG audio decoder is used.

For your reference

Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories Licensing Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel) sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc.

Caution for the optical digital audio output connector:

Do not connect an amplifier(with an optical digital input connector) which does not contain the Dolby Digital or MPEG audio decoder.

VGA Input

The VGA port of the TV is capable of accepting high-definition signals from computers with a VGA output jack. When used as a computer moniter, connect the VGA jack and the PC Audio In jack. A

15-Pin D-Sub cable (not supplied) is required for VGA connection and a 3.5mm stereo audio cable (not supplied) is required for the audio connection.

HDMI 1/2 Input

HDMI (High Definition Multimedia Interface) is a new type of connection that transmits digital audio and video signals simultaneously over a single cable.

A HDMI cable(not supplied) is required for the HDMI connection.

These HDMI input connectors are capable of receiving video at resolutions up to 1080p (1080-progressive).

8

Page 6
Image 6
COBY electronic TF-TV3717, TF-TV4217 operating instructions Cable Connections, Ae nnetins