Cable Connections
Figure. Cable connections
Antenna/Power Connection
111 Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CATV net. You can use 75 Ohm coaxial cable to connect outdoor antenna.
222 Insert one end of the supplied power cord to the player’s power jack and the other end to the
VGA Input - PC Connection
The VGA port of the TV is capable of accepting
Coaxial Output - Digital Audio Output Connector
When MPEG audio or Dolby Digital audio is played, Dolby Digital bitstream or MPEG audio bitstream is sent to the player’s digital audio output connector. When the player is connected to a Dolby or MPEG audio decorder via this output socket, you can enjoy
Phone Connection
Be sure that your unit is set at a low volume level before connecting the earphone. Increase the volume gradually for your comfortable listening.
CAUTION:
Hearing experts advise against the constant use of personal stereos played at high volume. Constant high volume use can lead to hearing loss. If you experience ringing in the ears or hearing loss, discontinue use and seek medical advise.
HDMI Input - AV Signal Input
HDMI (High Defiinition Multimedia Interface) is a new type of connection that transmits digital audio and video signals simultaneously over a single cable. A HDMI cable is required for the HDMI connection.
These HDMI input connectors are capable of receiving video at resolutions up to 1080p
Set the unit into the relative input mode to enable the signal pass.
Amplifier equipped with a Dolby
Pro Logic Surround
External AV Source
>
Wall Outlet
6
