Assembly cont.
Step 5
■Turn the Base over.
■Install legs to base. All Legs are identical.
■Do not install screws until Step 7.
Step 6
■ Turn Head Assembly over while | ■ Attach Collar to Head Assembly. |
holding Lid closed. | ■ Align ribs on Collar with Ignitor. |
Ribs
on
IgnitorCollar
■Install screws and tighten.
(Actual size)
Step 7
■Turn Head Assembly over while holding lid closed.
■Set Head Assembly on legs with Handle positioned as shown.
Handle
Grip
Step 7 cont.
(Actual size)
■Install Tank Retainer at Leg position opposite the Handle Grip.
Tank
Retainer
■Install Carriage Bolts, Washers, Nuts.
■Install Retaining Screws at bottom of Legs.
(Actual size)
■Tighten Retaining Screws and Nut on the Tank Retainer.
■Unit is now pre- pared for tank installation.
5