ÖÖAssemble the Electrode
Wires and the Battery to the
Electrode Module.
Note: The fuel hoses are not
shown in this step, for
simplicity.
14-A
Side Burner Wire
Top Burner Wires
Electrode Module
14-A. Slip the Top Burner Wires through the
large hole in the Top Panel.
ÖÖSlip the Side Burner Wire through the
large hole in the Left Panel.
ÖÖFirmly push the Electrode Wires into
the Electrode Module.
ÖÖAssemble the 9-Volt Battery to the
Electrode Module.
Note: The polarity is marked on the Electrode
Module.
Step
14
9-Volt Battery
14-B
Side Burner Wire
Igniter Button Wires
(Note: Large Tabs)
9-Volt
Battery
Electrode
Module
TEST THE IGNITER:
A SPARK SHOULD APPEAR AT
ELECTRODE TIP.
IF THE SPARK DOES NOT
APPEAR:
-CHECK THE WIRE
CONNECTIONS TO THE
MODULE.
-CHECK PROPER
ASSEMBLY OF FRESH
9-VOLT BATTERY.
Top
Burner
Wires
23