Coleman 9260-213, 9260-107 Attach Tent to Frame Using Frame Clips, Made In China, Attach Rainfly

3 Attach Tent to Frame Using Frame Clips

–Attach frame clips along

the edges of tent to frame poles. (illus. 5), (illus. 6)

–Make any adjustments to the tent corner stakes that are needed.

illus. 5

Frame clips

illus. 6

Assembled tent without rainfly.

4	Attach Rainfly	Pole sleeve
	–Assemble rainfly pole by
	interlocking shock-corded pole.	illus. 7
	–Insert rainfly pole through pole	Insert rainfly
	sleeve above vestibule door on the	pole piece
	underside of rainfly. (illus. 7), (illus. 8)	through the pole
	–Drape rainfly over tent frame, pole	sleeve on the
	side down. Rainfly pole should	underside
	be over the tent door.	of the rainfly
	–Insert one end of rainfly pole end
	onto pin of pin & ring system, at the	Vestibule door
	front tent corner. (illus. 4)	may be rolled
	–Go to opposite end of pole and	up and secured
	gradually apply pressure to the pole	with toggle &
	forming an arch until you are able to	loops for added
	insert the pin into the pole.	ventilation
	–Connect the four elastic loops with
	“S” hooks, (found at the rainfly
	corners) to the four rings
	located at the end of the stake
	loops at the corners of the tent.
	–Secure rainfly with frame ties	illus. 8 Completed tent with rainfly.
	located on underside of fly. (illus. 8)	Note where rainfly pole sleeves,
	–Stake out the tent with guylines. (illus. 8) rings, and under ties are located.
	–Stake out front of the vestibule.

Frame ties

Guyline

“S” hooks attach rings at the corners

Things You Should Know

•Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside surfaces of your tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent fabric. It can be mini- mized by removing wet clothing from your tent and by providing good ventila- tion through the tent.

•Never store tent, even for a short period of time, without drying it thorough- ly and brushing off caked dirt. Do not pack stakes or poles inside your tent. Use a separate storage bag.

•STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP TO REMOVE STAKE.

•TENT POLES SHOULD NOT BE LEFT TELESCOPED

TOGETHER DURING STORAGE.

•Seam sealer has not been provided with your tent. We recommend seam sealing your tent prior to camping. Seam sealer may be purchased through your local retailer or at your local sporting goods store.

•Do not leave your tent set-up for weeks at a time, be aware that expo- sure to the ultraviolet rays of the sun can seriously damage material and/or cause it to become discolored.

•See owners manual for more tips.

WARNING: KEEP ALL FLAME AND HEAT SOURCES

AWAY FROM THIS TENT FABRIC. This tent meets the flammability requirements of CPAI-84.The fabric will burn if left in continuous contact with any flame source.The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective.

THE COLEMAN CO., INC.

3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278 • www.coleman.com

PRINTED IN CHINA Rev. 11/03

MADE IN CHINA