INSTASTART™
Electronic Ignition Stoves
■Set on sturdy, flat surface. For outdoor use only.
■Push igniter button and hold; then open fuel valve fully (Fig. 12).
■Repeat for the other burner if needed.
Note: If igniter fails to light stove, replace the battery with a fresh AAA alkaline battery. If the igniter still fails to light stove, use match to light burner. If the stove is wet the igniter may not spark.
Fig. 12
Match Lighting
■Set on sturdy, flat surface. For outdoor use only.
■Hold lighted match near burner and open burner valve (Fig. 13).
■Repeat for the other burner if needed.
Fig. 13
■Adjust flame with burner valves (Fig. 14). Flame should be blue with a hint of yellow on tips.
Fig. 14
To Turn Off
■Close the burner valves firmly (Fig. 15).
Fig. 15
To Clean
■Make sure stove is cool.
■Move stove away from flame (including pilot lights) and other ignition sources.
■Remove propane cylinder from regulator and replace protective cap on cylinder (Fig. 16).
■Remove regulator from stove (Fig. 17).
Fig. 16 | Fig. 17 |
•MAINTENANCE
•Keep stove area clear and free from combustible materials, gasoline and other flammable vapors and liquids.
•Do not obstruct the flow of combustion and ventilation air.
•A good flame should be blue with minimal yellow tip. Some yellow tips on flames are acceptable as long as no carbon or soot deposits appear.
•Wipe clean with soft cloth and mild dish detergent. Do not use abrasives (Fig. 18).
Fig. 18
To Store
DANGER
•EXPLOSION - FIRE HAZARD
•Never store propane near high heat, open flames, pilot lights, direct sunlight, other ignition sources or where temperatures exceed 120 degrees F (49°C).
•The disposable cylinder must be disconnected when the stove is in storage.
