Coleman 9830-350 manual Phad X, Assemble Frame, Layout & Positioning, Rainfly, Pole Assembly

	Phad™ X2
	part number 9830-350
POLE ASSEMBLY PARTS
Main Tent Poles (Silver)	Rainfly
Part No. 9830-1151	Part No. 9830-1351
Side Pole (Red)
Part No. 9830-1251
1 Layout & Positioning	Main Tent Poles
of Rainfly, Pole Assembly	Side Poles
– Layout and position Rainfly with doors facing
desired direction. (illus. 1) Unzip doors.
– For best results in windy conditions, position
back of tent into the wind.
– Stake down rear tent corners. (illus. 1)
– Assemble frame poles by interlocking the
shock-corded sections. This will make two	illus. 1
long silver Main Tent Poles and one red
Side Pole.
– Insert the cap end of the two Main Tent Poles	illus. 2
through the poles sleeves with the silver trim.
	Tent stake
– Insert the cap end of the red Side Pole through	through Loop
the pole sleeve with the red trim.
Assemble Frame	Main Tent Poles
	Side Poles
2 – Start with one of the Main Tent Poles and
gradually apply pressure to the pole,
forming an arch, until you are able to
insert the pole tip into the grommet on
the corner web. (illus. 4)
– Repeat for second pole.
– Go to the Side Pole and gradually apply
pressure to the pole, forming an arch,
until you are able to insert the pole
tip into the grommet. (illus. 4)
	illus. 4
	Tent frame up
	illus. 3
	Insert Pole Talon on
	stake loop into pole.