3 Attach Tent
– Layout the tent. (illus. 5)
– Position the tent in under the Rainfly
– Starting at the back of the tent, clip the tent to the Rainfly in the corners and then the side. (illus. 6)
– Attach the top of the tent to underside of the Rainfly with toggle and loops.
(illus. 7)
– Optional ground cloth in vestibule can be removed at attached and clipped to the webbing at front of the Rainfly. (illus. 6)
– Stake out rainfly doors, keep rainfly taut. (illus. 8)
– Attach Guy Lines to Guy Wings on the sides of the Rainfly and stake out. (illus.8).
illus. 6
Tent clips onto pole stake loop
Guy Line
Tent toggles to loops on underside of Rainfly
illus. 5
Tent ositions in under Rainfly
illus. 7
Attach tent to underside of Rainfly with toggles
illus. 8
Completed tent with Rainfly.
Stake out
Things You Should Know
•Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside surfaces of your tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent fabric. It can be minimized by removing wet clothing from your tent and by providing good ventilation through the tent.
•
•
•
Seam sealer has not been provided with your tent. It is necessary and we recommend seam sealing your tent prior to camping. Seam sealer may be purchased through your local retailer or at your local sporting goods store.
Never store tent, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack stakes or poles inside your tent. Use separate storage bag.
STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE
ITSELF. NEVER PULL ON THE TENT FABRIC OR TENT STAKE
LOOP TO REMOVE STAKE.
• TENT POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER | 3600 N. Hydraulic • | Wichita, Kansas 67219 |
DURING STORAGE. | • www.coleman.com | |
|
PRINTED IN CHINA
© 2005 The Coleman Company, Inc. All Rights Reserved.