![](/images/new-backgrounds/1027713/2771323x1.webp)
Hearth & Home Technologies - Colville 1445 North Highway, Colville, WA
7. Place the White Rock
Open the bag of white rock and spread it over the ember bed glass and hearth refractory (if desired). This will create the effect of burning embers. Not all of the white rock needs to be used. See Figure 15.
8. Place the Lava Rock
Open the bag of lava rock (black) and spread it sparingly on top of the white rock and hearth refractory. This will create the effect of an ash bed. Not all of the lava rock needs to be used. See Figure 16.
9. Replace the Log Assembly
Set the logs back onto the grate assembly. Some of the rock may have to be rearranged. This will allow the logs to set correctly on the grate. See Figure 17.
10.Install the Door Front
a.Remove the door front and hood from the packaging. Using pliers (or your hands), bend out the tabs on the columns to attach the front to the appliance. See Figure 18.
b.Follow the installation instructions included in the door front kit.
The appliance is now ready to operate. See section “I. Operating Instructions”.
Note: When placing the white rock and lava rock, you may want to periodically turn on the appliance to check the appearance and customize to the desired effect.
Figure 16 - Placing Lava Rock
Figure 17 - Replace Log Assembly
Figure 15 - Placing White Rock
Figure 18 - Bending Out Tabs
09/03
VILLAGE COLLECTION ELECTRIC FIREPLACE | 12 |