Hearth & Home Technologies - Colville

1445 North Highway, Colville, WA 99114-2124

e.Remote Transmitter Function

1)The hand held remote transmitter is only an on/off control. When the transmitter is active, the remote LED light will be RED. Upon initial use, there may be a delay of three seconds before the remote receiver will respond to the transmitter. This is part of the system’s design.

2)With the main power switch (located on the appliance) in the “ON” position, press the on button on the hand held remote transmitter to turn on the appliance. The transmitter does not control/change the other switches or controls located on the appliance. Features of the appliance (flame motion and heater) will remain in their last set position. If you would like to change the setting you will have to access the manual controls (located on the appliance) to set the desired position.

3)To turn off the appliance, press the OFF button on the hand held remote transmitter.

4)With the appliance turned on by the hand held remote transmitter, you can override it by turning the manual flame switch on the appliance to “OFF” or by turning the optional wall switch off.

5)Operation of the switches on the dashboard will override all other switches within the appliance system and be operated by the dashboard switches.

3.Wall Switch Control (hardwired appliances only) (WSK-21-HTI & WSK-21-W-HTI)

a.The wall switch wiring can be found in the Section “F. Wiring”.

b.The wall switch has an operating voltage of 24VAC, do not hook up to 120/208/240VAC. For installations you can use 24AWG thermostat wire connected to a standard wall switch. It is recommended not to exceed 15’ of wire from appliance.

c.With the main power switch (located on the appliance) in the “ON” position, the wall switch can turn the appliance on and off. The wall switch does not control the other switches or controls located on the appliance. Features of the appliance (flame motion and heater) will remain in their last set position. If you would like to change the setting, you will have to access the manual controls (located on the appliance) to set the desired position.

d.With the appliance turned on by the wall switch, you can override it by turning the manual flame switch on the appliance to “OFF” or by pressing the OFF button on the remote transmitter.

4.FCC Requirements

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio or TV technician for help.

CANADIAN EQUIPMENT REQUIREMENTS

This digital apparatus does not exceed the Class A/Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This device complies with RSS-210may not cause interference, and 2) of the device.

of Industry and Science Canada. Operation is subject to the following two conditions: 1) This device this device must accept any interference, including interference that may cause undesired operation

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

15

VILLAGE COLLECTION ELECTRIC FIREPLACE

09/03 4030-240 Rev F

Page 14 Page 16
Page 15
Image 15
Hearth and Home Technologies QV32E (120V), QV32EV, QV32E warranty FCC Requirements, Remote Transmitter Function
Page 14 Page 16

QV32E (120V), QV32EV, QV32E specifications

Hearth and Home Technologies has established a strong reputation for quality and innovation in the realm of home heating solutions. Their line of electric fireplaces, particularly the QV32EV, QV32E, and QV32E (120V), exemplifies this commitment by blending aesthetic appeal with advanced technology.

The QV32EV stands out due to its versatile design, allowing it to fit seamlessly into a variety of spaces, whether modern or traditional. With its 32-inch screen, it offers a striking focal point that captivates any room. The electric fireplace provides realistic, flame-like visuals, employing LED technology that creates an impressive ambiance without the need for wood or gas. Users can enjoy the warmth and glow of a fireplace without the associated hassle of traditional fuel sources, making it an ideal choice for those seeking convenience and functionality.

The QV32E model is similarly designed to deliver the same exceptional features but comes equipped with enhanced control options. It includes a remote control that allows users to adjust flame brightness, heat settings, and even set a timer, ensuring a customized experience. The model is also designed for easy installation, requiring minimal effort to mount on walls or integrate into existing spaces.

For the QV32E (120V), the convenience of using a standard electrical outlet opens the door for easy placement in any area without the complications of gas lines or venting systems. This model also prioritizes safety, featuring an automatic shut-off system that engages when the unit overheats, providing peace of mind for users.

Each model within this series boasts an adjustable heat output, enabling users to select the level of warmth that best suits their needs. The efficient heating technology not only enhances comfort but also lowers energy costs compared to traditional heating methods.

Additionally, the stylish design, coupled with a range of customizable options, allows consumers to select different logs and media to tailor the appearance of their fireplace according to personal style preferences.

In summary, Hearth and Home Technologies' electric fireplaces—QV32EV, QV32E, and QV32E (120V)—offer a perfect blend of aesthetics, functionality, and user-friendly features, making them an unparalleled choice for anyone looking to enhance their living space. Ideal for all types of interiors, these electric fireplaces represent a modern solution for home heating needs, providing both beauty and efficiency.
Top Page Image Contents