13. After cleaning or inspection, | Fig. 15 |
return the burners down to the | |
proper position. Check that all |
|
the burner venturi are set over |
|
the valve outlets correctly. The |
|
valve orifices must be inside the |
|
venturi tubes and the venturi |
|
tubes must be inside the burner |
|
tubes (Fig. 15). Reinstall the |
|
burner screws. |
|
|
|
Burner Tube
Venturi
Tube
2.Open the grill lid and extend the side tables. Lower the propane bottle support (Fig. 17).
Fig. 17
14.Before lighting the grill, reassemble and make sure all parts are in their proper working position.
Installing 1 lb. Disposable Cylinders
NOTE: Your 9928 Series grill is set up from the
factory to use a 1 lb. disposable propane cylinder.
WARNING
Only cylinders marked “Propane” must be used.
WARNING
This procedure MUST be performed OUTDOORS only! Read and follow the directions on the cylinder.
DANGER
•NEVER store a spare L.P. gas supply cylinder under the grill body or inside the grill enclosure or in the vicinity of any heat producing appliance.
Failure to follow this information exactly could result in an explosion and/or fire causing death or serious injury.
CAUTION
Tighten by hand only. DO NOT use tools.
1. Screw the regulator into the grill hand tight (Fig. 16).
Fig. 16
Propane
Bottle
Support
3.Remove the plastic cap from the propane bottle and screw the propane bottle into the regulator hand tight (Fig. 18).
Fig. 18
4.The cylinder must be arranged for vapor withdrawal. Illustration (Fig. 19) shows the propane bottle properly installed.
Fig. 19
