Coleman 9928 Series manual Lighting Instructions, Lighting The Burners, Match Lighting

Lighting Instructions

WARNING

THE FOLLOWING RULES MUST ALWAYS BE FOLLOWED IN THIS ORDER (Fig. 22):

1.OPEN THE GRILL LID! Any attempt to light the grill with the lid down could cause an explosion.

2.Check that the burner control knobs are turned to “OFF”.

3.DO NOT stand with your head or arms over the grill.

Fig. 22

3

1

2

Fig. 23

Right Burner

Knob

Igniter Switch

Left Burner

Knob

Lighting The Burners

1.Push and turn one of the burner control knobs counterclockwise to the “HIGH” position. Wait 5 seconds (Fig. 23 and 24).

2.Push igniter button repeatedly until burner lights. You will hear a snapping sound (Fig. 24).

3.If the burner does not light in 4 seconds, turn the control knob to OFF and wait 5 minutes for the gas to clear before trying again.

4.The second burner can be ignited by turning it on after first burner is lighted.

5.If the burner does not light on the second try, turn the control knob to OFF and wait 5 minutes for the gas to clear, and then try match-lighting the burner.

Fig. 24

Match Lighting

1.Strike and place the burning long wooden match (or use the match extension or a butane lighter with extension) through the spaces in the grill grates near the ports of the burner between the heat tents (Fig. 25).

2.Push and turn the control knob counterclockwise to the “HIGH” position.

3.The second burner can be ignited by turning it on after first burner is lighted.

CAUTION

Use a LONG wooden match or a butane lighter with an extension. Make sure all burner controls are off except for the burner being lighted. If a long-reach match or lighter is not accessible, use the match extension. Insert a match in the holder end of the extension, strike and place the burning match near the BURNER being operated.

Fig. 25

English-9