Lighting the Grill continued

Step 3

■Turn Righthand Burner Valve to “High.”

■Press Igniter Button to light. NOTE: If the flame doesn’t imme- diately light, turn off control knob and wait five minutes for gas to clear.

■Repeat steps 1 through 3.

■If the burner does not light on second try, turn off knob and try match-lighting the burner.

■Repeat steps 2 and 3 for Lefthand L.P. gas cylinder and Lefthand Burner.

NOTE: You must push Igniter Button to ignite the second side of the grill.

■ All Burner Valves can be adjusted from “Low” to “High.”

Match Lighting

■Use a LONG wooden match or the match extension provided. Make sure all burner controls are off except one being lighted.

■Insert a match in the holder end of the extension, strike the match and place the match near the burner from above.

■Turn on BURNER CONTROL KNOB while holding match near burner.

■You must use another match to ignite the second side of the grill.

Tear Down/Clean

Step 1

■Make sure Burner Valves are in OFF position.

■Allow unit to cool completely.

Step 2

■Turn off fuel supply on both L.P.

gas cylinders.

10

Tear Down/Clean continued

Step 3

■Remove Regulators from Propane Cylinder Connection.

Step 4

■Remove Grease Pans. Slide out from front of grill to clean or install new aluminum liners in Grease Pans.

Step 5

■Unlock tab as shown.

■Slide out Grease Tray.

■Clean thoroughly before storing grill.

■Slide Grease Tray back into position under grill and lock tab.