To Set Up continued

Step 6

LEFT LID (SHELF)

CENTER LID

RIGHT LID (SHELF)

■Unlock Right Side Lid.

NOTE: Undo latches on

LID FLAPS

front and back of lid.

 

■ Release flaps to form

 

Right Side Shelf.

 

 

 

 

 

IMPORTANT: Always remove Lids in this order:

•Right Lid first.

•Left Lid second.

•Center Lid last.

To Set Up continued

Step 7

■Install two Grease Pans from front as shown.

Step 8

■Install 9-Volt Battery with positive (+) terminal as shown on Igniter Module.

■Carefully insert Shelf Lip on Right Side Shelf into Top Channel, while at the same time making sure the Notches on the side Flaps fit into the Flanges on the grill body.

SHELF LIP

Igniter Module

Leak Testing

SHELF LIP

DETAIL “A”

DANGER

TOP CHANNEL

TO PREVENT FIRE OR EXPLOSION HAZARD:

TOP CHANNEL

NOTCH

DETAIL “B”

 

NOTCH

•NO SMOKING. DO NOT use or permit sources of ignition in the area while doing a leak test.

•Perform leak tests outdoors only.

•NEVER perform a leak test with fire or flame.

How to Check for Leaks

FLANGE

FLANGE

 

 

 

 

■Repeat the same order for attaching the Left Side Shelf as you did on the Right Side Shelf.

■Remove Center Lid and set aside until ready for storage of the grill.

8

1.Make a soapy solution of equal parts mild liquid dishwashing detergent and water.

2.Turn off all burner control knobs.

3.Turn on fuel supply. Turn cylinder valve knob counterclock- wise (right to left) one rotation.

4.Apply soap solution to connections indicated with arrows in Fig. 15. If bubbles appear at these areas, a leak is indicated.

15