Grill Assembly (continued)
Assemble the Doors and the Tool Hook
NOTE: On some models, the Doors and the Tool Hook are pre- assembled at the factory.
1. Install both doors by first |
| 2. Assemble the Tool Hook to | ||
inserting the lower pin and the |
| the left door using three | ||
upper pin in the hinge holes at |
| screws. Tighten the screws | ||
the same time (Fig. 31). |
| with a screwdriver (Fig. 32). | ||
|
|
|
|
|
Fig. 31 |
| Fig. 32 |
| |
|
|
|
|
|
2.Loosely engage the screws only several turns (Fig. 34). In the next step, the screw heads will engage slots in the doors from the outside before they are tightened.
3.Insert the screw heads into the slots in the outside of the door. The screws must be inserted in sequence. First, slide the short screw into the slot. The lockwasher must touch the screw head. Next, insert the long screw (Fig. 35).
PLEASE NOTE: Only the slender portion of the long screw will slide past the narrow part of the slot. This feature locks the shoulder screw in place.
Assemble the Doors Handles
1. Assemble two sets of handles with parts illustrated in (Fig. 33).
Fig. 34 |
| Fig. 35 |
First | Last |
Fig. 33
Lockwasher |
Short |
Lockwasher touches Screw Head
Shoulder
Narrow
part of Slot
screw |
Long screw |
with shoulder |
4.Tighten both screws with a screwdriver. Access holes are provided on the inside of each door (Fig. 36).
Fig. 36
10
