Grill Assembly

Assemble the Grill Lid

1. Hardware to attach the grill

2. Carefully place the Grill Lid

lid are two pins and hairpin

onto the grill frame in the

cotters (Fig. 19).

closed position (Fig. 20).

Fig. 27

 

Fig. 28

Fig. 19

3.Insert each pin through the lid and windscreen (Fig. 21). Raise the lid slightly to help align the holes.

Fig. 21

Fig. 20

4.Carefully raise the lid to the open position (Fig. 22).

Fig. 22

Assemble the Propane Tank Retainer

1. Insert the ends of the Propane

Fig. 29

Tank Retainer into the holes

 

 

provided in the right side panel

 

(Fig. 29). Use the pins

 

provided with the Retainer to

 

secure the Retainer in place.

 

5.Install one hairpin cotter on each pin (Fig. 23).

Fig. 23

Assemble the Thermometer

1.Hardware to attach the thermometer are two wing nuts. Finger tighten the wing nuts on the inside of the lid. DO NOT OVERTIGHTEN

the wing nuts (Fig. 24 and 25).

 

 

 

 

 

Fig. 24

 

 

Fig. 25

 

Assemble the Warming Rack

and the Grease Tray

Fig. 26

Assemble the Wire Shelf

1.Insert the ends of the Wire Shelf into the holes provided in the back panel. Use a screwdriver to attach the shelf to the base with two screws (Fig. 30).

Fig. 30

9

Page 9
Image 9
Coleman 9998 Series manual Assemble the Grill Lid, Assemble the Propane Tank Retainer, Assemble the Thermometer