Phad X3

 

part number 9830-392

POLE ASSEMBLY PARTS

 

Main Tent Poles (Silver)

Rainfly

Part No. 9830-1161

Part No. 9830-1361

Side Pole (Red)

 

Part No. 9830-1261

 

1 Layout & Positioning

Main Tent Poles

 

of Rainfly, Pole Assembly

 

– Layout and position Rainfly with doors facing

 

desired direction. (illus. 1) Unzip doors.

 

– For best results in windy conditions, position

 

back of tent into the wind.

illus. 1

– Stake down rear tent corners. (illus. 1)

– Assemble frame poles by interlocking the

Side Pole

 

shock-corded sections. This will make two

 

long silver Main Tent Poles and one red

 

Side Pole.

illus. 2

– Insert the cap end of the two Main Tent Poles

Tent stake

through the poles sleeves with the silver trim.

through Loop

 

– Insert the cap end of the red Side Pole through

 

the pole sleeve with the red trim.

Main Tent Poles

 

Assemble Frame

Side Poles

2 – Start with one of the Main Tent Poles and

 

gradually apply pressure to the pole,

 

forming an arch, until you are able to

 

insert the pole tip into the grommet on

 

the corner web. (illus. 4)

 

– Repeat for second pole.

illus. 4

– Go to the Side Pole and gradually apply

Tent frame up

pressure to the pole, forming an arch,

 

until you are able to insert the pole

 

tip into the grommet. (illus. 4)

 

illus. 3

 

Insert Pole Talon on

 

stake loop into pole.

 

Page 1
Image 1
Coleman X3TM manual Phad X, Assemble Frame, Layout & Positioning, Rainfly, Pole Assembly