Setting Up Your FRS/GMRS Radio
Battery Installation
To use the radio, you must install 4 AAA size batteries.
Caution: incorrect positioning of the batteries can damage both the batteries and the unit.
To install the batteries:
•Remove the belt clip by pulling the tab on the top of the belt clip back, and sliding it up and off of the unit.
•Pull the battery door lock tab down to release the battery cover.
•lnsert four AAA batteries. Position the batteries according to the polarity markings on the plastic.
•Replace the battery cover. Snap the lock tab and belt clip back into place.
connecting the adaptor
Lift the rubber flap on the top of the unit to expose the jack.
To use the unit with an AC/DC Adaptor rechargeable batteries insert the round connector (OD 2.5mm) of the7.5V DC/ 100mA AC/DC adaptor* into the SPK/ MIC/CHG jack on top of the unit.
Note The unit should be turned OFF in order to charge the batteries properly.If the unit is turned ON and placed for charging the charge current is too low
for the battery to charge up as the unit is
6
