Opening/Storing the High Chair
Opening
1.Pull up the left and right height adjustment levers and then lift the main body up.
2.Release your fingers from the left and right lever when the desired height is fixed. At this time, check to see that the left and right height adjustment indications are in matching positions before using.
Storing
Pull up the left and right height adjustment levers and pull main body up slightly to unlock, then slowly lower the high chair.
CAUTION
Remove child before adjusting heights.
Attaching/Removing the Seat Cushion
Removing the Seat Cushion
1.Unbuckle the
2.Grasp the seat cushion and carefully remove.
Attaching the Seat Cushion
1.Pass the
2.Shape the cushion to the seat frame and velcro into position.
3.Loop the right and left side bands around the hooks located behind the seat of the main unit.
CAUTION
Do not use a seat cushion that is ripped or torn.
Always use the high chair with the cushion attached. Failure to do so may injure your child.
Attaching/Removing the Tray
Attaching the Tray
1.Insert the tray along the guides on the sides of the main unit.
2.Pull the lever located under the front of the tray and slide the tray back until a comfortable position is found for your child. Position the tray so that the sides are locked into matching positions.
Removing the tray
Locate the tray release lever and pull off.
CAUTION
Before using, check to see that the tray is locked into the position you set.
Pay attention so that the child’s fingers are not in the guide on the side of the main unit to avoid injury.
- 3 -
