Section 9 - Installing the Car Seat Base with Vehicle Belts 29
Section 9 - Installing the Car Seat Base with Vehicle Belts 30
Pull Belt | Press down |
tight | firmly on base |
|
|
LAP ONLY BELT
Select the best position in the vehicle and position the base at the correct angle. (See pages 19,20,21 and 24)
Pass the vehicle Lap belt over the front of the base threading the belt under the routing lugs, and through the
Pull the belt tight!
Excess vehicle belt can be passed back under the routing lugs and through the built- in Locking Clip.
Pull Belt | Press down |
tight | firmly on base |
|
|
Shoulder belt
LAP/SHOULDER BELT
Select the best position in the vehicle and position the base at the correct angle. (See pages 19,20,21 and 24)
Route the vehicle Lap belt over the front of the base threading the belt under the routing lugs, and through the
Pull the belt tight!
Then pass the shoulder belt back under the routing lugs and through the Locking Clip. Maintain the belt tension.
WARNING: Read the information on page 21 about having the car seat too upright or too reclined.
If it is not possible to install the base at the correct angle, try a different position or do not install in the vehicle.
WARNING: Not all vehicle belts are suitable for a car seat installation. See Section 11 for more information on suitable vehicle belts.