Section 6 - Securing Infant in Car Seat | 15 |
Non-Adjustable Headrest Models
If the height of the shoulder straps needs adjusting, turn the car seat over and detach the straps from the steel connector plate. Reposition the straps as required and reattach the straps.
IMPORTANT: Check that the shoulder straps are securely attached to the connector plate. Straps must not be twisted!
Section 6 - Securing Infant in Car Seat | 16 |
Place harness straps over infants shoulders and thighs, and secure the Harness Buckle.
The harness must be a snug (not loose) fit on the infant.
A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press the infant's body into an unnatural position.
To increase the tension of the harness, pull the harness adjuster strap
"CLICK" | IMPORTANT: You should hear a "click" as the |
| buckle tongues engage. |