Compaq 1124 manual Installing the Repeater, 6. Installing a Redundant Power Module

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-8Installing the Repeater

PWR B PWR A

Redundant Power Supply Module

Spring Screws

Figure 3-6.Installing a Redundant Power Module

4.Plug the power cord into the connector on the new power supply module.

5.Insert the power cord’s three-pronged plug into a non-switched, grounded power outlet on a wall, a power strip, or a grounded extension cord. When you connect power, the PWR B LED indicator lights green, which means that the power supply module is installed and functioning correctly.

NOTE: If the power supply module does not have power or is not functioning correctly, the PWR B LED indicator lights yellow.