C-2
Error Messages
Writer: Holly Jahangiri Saved by: Alyce Klingler-Castle Saved date: 06/10/97 3:54 PM
Pages: 6 Words: 992 Template: d:\95office\templates\commapp.dot
File Name Appc Part Number 278019-002
Power-On Self-Test Messages
Continued
Message Beeps* Probable Cause Recommended Action
203-Memory
Address Error None RAM failure. 1. Run Computer Setup or Windows
NT or Windows 95 utilities.
2. Replace the memory module(s) (if
any).
3. Replace system board.
205-Memory Error None Cache memory error
(processor cache). Run the Configuration and Diagnostics
utilities.
206-Secondary
cache controller
failure
None Cache memory controller or
RAM failure. Run the Configuration and Diagnostics
utilities.
207-ECC corrected
single bit error 2S Single Bit ECC error Replace DIMM if error persists.
213-Incompatible
DIMM Module in
DIMM Socket(s) X,
X, ...
2S A DIMM module in DIMM
socket identified in the error
message is missing critical
SPD information, or is
incompatible with the chipset
Replace the DIMM with a module
conforming to the SPD standard. See
Adding System Memory in Chapters 5,
"Upgrading the Desktop Computer" and
Chapter 6, "Upgrading the Minitower
Computer."
301-Keyboard Error None Keyboard failure. Reconnect keyboard with computer
turned off.
301-Keyboard Error
or Test Fixture
Installed
None Keyboard failure. Replace the keyboard.
303-Keyboard
Controller Error None I/O board keyboard controller. 1. Reconnect keyboard with computer
turned off.
2. Replace the system board.
304-Keyboard or
System Unit Error None Keyboard failure. 1. Replace the keyboard.
2. Replace the system board.
402-Monochrome
Adapter Failure 1L, 2S Monochrome display
controller. Replace the monochrome display
controller.
* L = Long, S = Short
continued