
AlphaServer DS20 Pedestal–Rackmount  Windows NT
Step 5a Storage Controllers
Selection of two SCSI ports is mandatory for internal storage, see Step 1c. Charts indicate minimum level of operating system supported.
| 
 | 
 | Maximum # Supported | 
| Order Number | Description | Windows NT 4.0 SP3 | 
| 
 | 
 | 
 | 
| 4 | ||
| 
 | Combo adapter, uses 1 PCI slot. Internal  | 
 | 
| 
 | two external  | 
 | 
| 
 | 
 | 
 | 
| VHDCI male to VHDCI male UltraSCSI cable; required for each external | 
 | |
| 
 | UltraSCSI shelf attached to KZPCM. | 
 | 
| 
 | 
 | 
 | 
| 
 | 
 | 
 | 
| 4 | ||
| 
 | pin and  | 
 | 
| 4 | ||
| 
 | pin HD connector. | 
 | 
| 
 | ||
| 
 | UltraSCSI shelf attached to  | 
 | 
| 
 | 
 | 
 | 
| 2 | ||
| 
 | includes RAID Array 230/Plus Subsystem software and documentation kit. | 
 | 
| 
 | VHDCI female connector. Tape drives are not supported. | 
 | 
| 
 | 
 | 
 | 
| 2 | ||
| 
 | includes RAID Array 230/Plus Subsystem Software and documentation kit. Tape | 
 | 
| 
 | drives are not supported. SCSI cable is required for each active port. Requires | 
 | 
| 
 | 
 | |
| 
 | 
 | 
 | 
| Same as  | 2 | |
| 
 | 
 | 
 | 
| Cache battery backup for KZPAC controller | 
 | |
| 
 | 
 | 
 | 
| VHDCI male to VHDCI male UltraSCSI cable; required for each external | 
 | |
| 
 | UltraSCSI StorageWorks shelf attached to KZPAC. Note: Manufacturing may | 
 | 
| 
 | substitute  | 
 | 
| SCSI cable/bulkhead assembly kit with  | 
 | |
| 
 | connection of one third port. | 
 | 
| SCSI cable/bulkhead assembly kit with two ports for  | 
 | |
| 
 | external connection of two third ports. | 
 | 
1.18.2 GB disk drives are not supported on 
2.SCSI cable/bulkhead assembly kit supports one third port connection from 
3.SCSI cable/bulkhead assembly kit supports two third port connections from 
(.5 METER)
2.6Alpha Servers
