Compaq HNE-200 manual Technical Specifications, Installing the Software

3.Connect one end of the cable to the RJ-45 port on the USB Adapter 3 and the other end to any available station port on a network hub or switch.

Note: When inserting an RJ-45 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated.

4.Install the product software, including printer sharing, file sharing and Internet connection sharing, using the Install Software option on this CD.

Installing the Software

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿$￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿$￿￿(￿￿￿￿￿￿$￿￿￿￿$￿￿￿￿'￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿$￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿)￿￿￿￿￿￿$￿￿ ,￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿%3￿

Technical Specifications

Model	HNE-200
Ports	1 USB Type-B
	RJ-45 for 10BASE-T/100BASE-TX
Standards	IEEE 802.3x for Auto Negotiation,
Conformance	IEEE 802.3 10BaseT, IEEE 802.3u 100BaseTX,
	USB Spec v 1.0 and 1.1
Certifications	FCC Part 15B, CE
Access Protocol	CSMA/CD
Driver Support	Microsoft6 Windows6 98, 98SE, Millennium, 2000
Cable Wiring	90T shielded USB cable, maximum length 5 meters
(USB port and	(16 feet)
RJ-45 port)	10BASE-T: 100T Category 3,4,5 shielded/unshielded
	twisted-pair, max length 100 m (328 ft)
	100BASE-TX: 100W Category 5 shielded/unshielded
	twisted-pair, max length 100 m (328 ft)
Access Method	USB Spec v. 1.0 and 1.1 differential and
USB port	bi-directional, 12 Mbps (high-speed device)
Access Method	IEEE 802.3x, IEEE 802.3 and IEEE 802.3u CSMA/CD,
RJ-45 port	10 and 100Mbps baseband, Full/Half Duplex
Input Power	4.75~5.25 VDC, 0.3A max. (Bus powered from USB
	host controller or hub or switch)
Power	1.5 Watts maximum (from USB host)
Consumption
Heat Dissipation	9 BTU/hr

IPAQ NETWORKING 10/100 FAST ETHERNET USB ADAPTER INSTALLATION AND SETUP GUIDE 8