7. Remove the top cover (3).
Reverse this procedure to install the top cover.
Caps lock LED board
Description | Spare part number |
|
|
Caps lock LED board (includes cable) | |
|
|
Before removing the caps lock LED board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 37).
5. Remove the following components:
a. Hard drive (see Hard drive on page 38)
b. Optical drive (see Optical drive on page 44)
c. Keyboard (see Keyboard on page 46)
d. Switch cover (see Switch cover on page 49)
e. Display assembly (see Display assembly on page 51)
f. Top cover (see Top cover on page 56)
Remove the caps lock LED board:
1. Turn the top cover upside down, with the front toward you.
2. Remove the Phillips PM2.0×4.0 screw (1) that secures the caps lock LED board to the top cover.
58 Chapter 4 Removal and replacement procedures
