Compaq HW194 User’s Manual, Error Message & Possible Solutions Cable Not Connected, Timing, Mode

User’s Manual

ERROR MESSAGE & POSSIBLE SOLUTIONS

CABLE NOT CONNECTED :

1.Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws.

2.Check the signal-cable’s connection pins for damage.

INPUT NOT SUPPORT :

Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.

FACTORY PRESET TIMING TABLE:
				VERTICAL
	TIMING	MODE	HORIZONTAL
			FREQUENCY (kHz)	FREQUENCY (Hz)
	640x350	VGA-350	31.469	70.087
	640x400	VGA-GRAPH	31.469	70.087
	640x400	NEC PC9821	31.5	70.15
	640x480	VGA-480	31.469	59.94
	640x480	APPLE MAC-480	35.00	66.67
	640x480	VESA-480-72Hz	37.861	72.809
	640x480	VESA-480-75Hz	37.5	75
	720x400	VGA-400-TEXT	31.469	70.087
	832x624	APPLE MAC-800	49.725	74.55
	800x600	SVGA	35.156	56.25
	800x600	VESA-600-60Hz	37.879	60.317
	800x600	VESA-600-72Hz	48.077	72.188
	800x600	VESA-600-75Hz	46.875	75
	1024x768	XGA	48.363	60.004
	1024x768	COMPAQ-XGA	53.964	66.132
	1024x768	VESA-768-70Hz	56.476	70.069
	1024x768	VESA-768-75Hz	60.023	75.029
	1024x768	APPLE MAC-768	60.24	75.02
	1152x864	75Hz	67.50	75.00
	1280x960	60Hz	60.00	60.00
	1280x1024	VESA-1024-60Hz	64	60
	1280x1024	VESA-1024-75Hz	80	75
	1440x900	VESA-1440-60Hz	55.935	59.887
	1440x900	VESA-1440-75Hz	70.635	75

19