Compaq MP1600 On-ScreenMenu Adjustments

IMPORTANT: To use standby mode, press the Standby button and, after a six to ten-second delay, the unit enters standby mode and the projector lamp turns off. A “Going to Standby” message appears on the screen for the duration of the six to ten-second delay. When the message disappears from the screen, there is a 45-second delay before the lamp can be turned back on. Wait 45 seconds to allow the lamp to cool before pressing the Standby button again.

On-Screen Menu Adjustments

The adjustments for screen settings are located in the on-screen menu and can be viewed in one of six available languages. The following menu shows the functions at each level:

Main Menu	Menu Level 2	Menu Level 3
Brightness	Adjustment scale
Contrast	Adjustment scale
Position	Horizontal Position	Adjustment scale
	Vertical Position	Adjustment scale
	Save and Return
	Cancel
Zoom	Zoom	Adjustment scale
	Panning Left-Right	Adjustment scale
	Panning Up-Down	Adjustment scale
	Save and Return
	Cancel
Keystone	Adjustment scale
Picture	Dark - Light
Color	7100 K
	Custom Color	Adjustment scale
	Saturation	Adjustment scale
	Save and Return
	Cancel
Digital	Clock	Adjustment scale
Conversion	Clock Phase	Adjustment scale
	Save and Return
	Cancel
		Continued

MP1600 Microportable Projector 1-19