Continued

Lamp shuts off

1. If all five LEDs flash amber, the

 

projector has overheated and will

 

automatically shut down. Wait

 

five to ten minutes until the LED

 

buttons stop flashing and the

 

Standby Button turns amber

 

before restarting the projector

 

again.

 

2. A minor power surge may cause

 

the lamp to shut off. Wait a few

 

minutes, then turn it back on.

 

 

Lamp burns out or makes a

When the lamp reaches its end of life,

popping sound

it will burn out and may make a loud

 

popping sound. If this happens, the

 

projector will not turn back on until

 

the lamp module has been replaced.

 

Contact your local Compaq

 

authorized dealer, seller, or reseller

 

to purchase a replacement lamp

 

module. To replace the lamp, follow

 

the procedures in the "Replacing the

 

Projector Lamp Module" section.

 

 

A-4Troubleshooting