Care and Maintenance 5-3
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 5 Words: 916 Saved date: 05/17/004:44 PM File Name: Ch05
CAUTION: Do not store a cleaning cloth in contact
with the lens for a long time as doing so may
contaminate the lens with dye from the cloth. The
cloth can be contaminated if left in the open air or in a
lab coat pocket.
Replacing the Projector Lamp Module
When the projector lamp reaches its end of life, it may pop when it
burns out. The lamp will need to be replaced before the projector
can be used again.
!WARNING: When the lamp reaches its end of life, it
may pop or rupture. To reduce the risk of personal
injury, be careful when removing the lamp cover as
broken glass may be present. Never open the lamp
cover while the projector is operating or when the
lamp is hot.
The projector will alert you when the lamp approaches its failure
mode or end of life. When the message “Lamp May Fail Soon -
Replacement Suggested” displays on the projection screen, you
should change the lamp as soon as possible. Contact your local
Compaq authorized dealer, seller, or reseller to purchase a spare
lamp or have the lamp changed. You can also purchase a lamp
directly through www.Compaq.com