Using the Projector 2-9
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 9 Words: 1439 Saved date: 05/17/004:43 PM File Name: Ch02
When the Multimedia Adapter is attached to the projector, the
following messages, in addition to the previous messages, will
appear on the projection display to identity the following
conditions:
■ Analog, Use Source to Change Input—Indicates analog and
DVI inputs are connected. Since the projector will default to
display analog, you must press the Source button to switch to
DVI.
■ DVI, Use Source to Change Input—Indicates DVI along with
other video and/or analog sources present. Analog is the default
setting. Press the Source button to switch to DVI.
■ Analog, Use PIP for Picture in Picture or Use Source to
Change Input—Indicates analog plus video and DVI are
present. Analog is the default setting. Press the PIP button on
the remote control for picture in picture or change the setting by
pressing the Source button.
■ Composite Video, Use Source to Change Input—Indicates
composite video or other inputs are present. Composite video is
the default setting. Press the Source button to the setting.
■ S-video, Use Source to Change Input—Indicates S-video with
other inputs are active. Press the Source button to change the
setting.