Compaq nx7300 manual Network Architecture Models Roaming Output Power for

QuickSpecs

HP Compaq nx7300 Notebook PC

Technical Specifications

Network Architecture

Models

Roaming

Output Power (for

CKK)2

Output Power (for OFDM; power varies by data rate)2

Power Consumption

Power Management

Receiver Sensitivity4

Antenna type

Range

Form Factor

Weight

Dimensions

Operating Voltage

Temperature

Humidity

Altitude

Configuration Utility5

LED Activity

Ad-hoc (Peer to Peer)

Infrastructure (Access Point Required)

IEEE 802.11 compliant roaming between access points

17.5dBm

15 dBm

Transmit: 2.0 W (max)

Receive: 1.5 W (max)

Idle mode3: 390 mW (nominal)

Sleep mode: 20 mW (max)

ACPI compliant power management 802.11 compliant power saving mode

54 Mbps: -72 dBm, 11 Mbps: -88 dBm , 1 Mbps: -97 dBm

High efficiency dual band antenna with spatial diversity, mounted in the display enclosure

802.11 a – Typical	600 feet – Outdoor Open Area
(@6 Mbps)	150 feet – Indoor, Office environment
802.11 b – Typical	1200 feet – Outdoor Open Area
(@1 Mbps)	300 feet – Indoor, Office environment
802.11 g – Typical	1200 feet – Outdoor Open Area
(@1 Mbps)	300 feet – Indoor, Office environment
PCI-Express MiniCard
0.026 lb (12 g)

0.19x 1.2 x 2.0 in (4.75 x 29.85 x 50.8 mm)

3.3v +/- 10%

Operating	32° to 176° F (0° to 80° C)
Non-operating	-40° to 176° F (-40° to 80° C)
Operating	10% to 90% (non-condensing)
Non-operating	5% to 95% (non-condensing)
Operating	0 to 10,000 ft (3,048 m)
Non-operating	0 to 50,000 ft (15,240 m)

Choice of Configuration Utility:

Microsoft Windows XP Wireless Network Connection Manager Broadcom Wireless Configuration Utility (required for Cisco Compatible Extensions support)

LED Off – Radio OFF; Solid LED On – Radio ON

1.Check latest software/driver release for updates on supported security features.

2.Maximum output power may vary by country according to local regulations.

3.In Power Save Polling mode.

4.Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CKK modulation) and a packet error rate of 10% for 802.11a/g (OFDM modulation).

5.WLAN supplier's client utility is required for Cisco Compatible Extensions support. WLAN may also be compatible with certain third-party software supplicants.

Intel PRO/Wireless	Wireless LAN	IEEE 802.11a
3945ABG 802.11a/b/g	Standards	IEEE 802.11b
Network Connection		IEEE 802.11g

DA - 12614 Worldwide QuickSpecs — Version 3 — 1.30.2007 Page 25