Compaq Presario M2000 manual Removing or Inserting a Memory Module

Hardware Upgrades and Replacements

Removing or Inserting a Memory Module

ÅWARNING: To prevent exposure to electrical shock, access only the memory compartment during this procedure. The memory compartment, the battery bay, and the hard drive bay are the only user-accessible internal compartments on the notebook. All other areas that require a tool to access should be opened only by a service partner.

ÅWARNING: To prevent exposure to electrical shock and damage to the notebook, shut down the notebook, unplug the power cord, and remove the battery pack before installing a memory module.

ÄCAUTION: To prevent electrostatic discharge from damaging electronic

components: before beginning this procedure, discharge yourself of static electricity by touching a grounded metal object. For more information about preventing electrostatic damage, refer to the “Electrostatic Discharge” chapter in Regulatory and Safety Notices on the User Guides CD.

1.Save your work and close all open applications.

2.Shut down the notebook.

If you are unsure whether the notebook is off or in hibernation, turn the notebook on and then shut it down through the operating system.

3.Disconnect all external devices connected to the notebook.

4.Disconnect the notebook from external power.

5.Remove the battery pack.

For instructions, refer to the “Replacing a Battery Pack” section in Chapter 3, “Power.”

7–18 Hardware and Software Guide