Compaq user manual SMX945 Condensed Manual V1.0A, Initial Version

DIGITAL-LOGIC AG		SMX945 Condensed Manual V1.0A
For internal use only:
File:	SMX945_Condensed_V1.0A.doc
Path:	R:\HANDBUCH\smart\SMX945\SMX945_Condensed_V1.0A.doc

COPYRIGHT  2007 BY DIGITAL-LOGIC AG

This publication is protected by copyright and all rights are reserved. No part of this document may be reproduced, transmitted, transcribed or stored in a retrieval system, in any form or by any means, electronic, mechanical, optical, manual, or otherwise, without the prior written permission of DIGITAL-LOGIC AG.

The software described herein, together with this document, are furnished under a license agreement and may be used or copied only in accordance with the terms of that agreement.

About this Manual and How to Use It

This manual is written for the original equipment manufacturer (OEM) who plans to build computer systems based on the single board MICROSPACE-PC. It is for integrators and programmers of systems based on the MICROSPACE-Computer family. This manual provides instructions for installing and configuring the board, and describes the system and setup requirements. This document contains information on hardware requirements, interconnections, and details of how to program the system. Please check the Product CD for further information and manuals.

REVISION HISTORY:

Document	Date/Initials:		Modification:
Version			Remarks, News, Attention:
V1.0	05.2007	KUF	Initial Version
V1.0A	07.2007	WAS	Control & general corrections / Updated block diagram

Attention!

1.All information in this manual, and the product, are subject to change without prior notice.

2.Read this manual prior to installation of the product.

3.Read the security information carefully prior to installation of the product.

2