2–6 Maintenance and Service Guide
Troubleshooting
Selecting from the Advanced Menu

Tabl e 2- 4

Advanced Menu

Select To Do This
Language (or press f2) Change the Computer Setup language.
Boot options ■Enable/Disable MultiBoot, which sets a startup
sequence that can include most bootable
devices and media in the system.
■Set the boot order.
Device options ■Swap the functions of the fn key and left ctrl
key.
■Enable/Disable multiple pointing devices at
startup. (To set the computer to support only a
single, usually nonstandard, pointing device at
startup, select Disable.)
■Enable/Disable USB legacy support for a USB
keyboard, mouse, and hub. When USB legacy
support is enabled
❐A USB keyboard, mouse, and hub work
even when a Windows operating system
is not loaded.
❐The computer starts from a bootable hard
drive, diskette drive diskette, or CD,
CD-RW, orDVD inserted into a drive
connected by a USB port to the computer
or to an optional docking device.
■Select a parallel port mode: EPP (Enhanced
Parallel Port), standard, bidirectional, or ECP
(Enhanced Capabilities Port).
■Enable/Disable all settings in the SpeedStep
window. (When Disable issel ected, the
computer runs in Battery Optimized mode.)