Manuals / Compatible Systems / Computer Equipment / Network Card

Compatible Systems 10/100 manual Connecting a Management Console

Models: 10/100

1 13
Download 13 pages 59.97 Kb
Page 6
Image 6

Chapter 1 - Network Installation

3

Connecting a Management Console

To connect a management console, use the supplied cable and connect to the Console interface on the 10-100 Ethernet - DES I/O card. You can use a dumb terminal or a computer equipped with VT100 terminal emulation.

The default settings for the Console interface are VT100 terminal emulation, 9600 bps, 8 bits, no parity, 1 stop bit and no Flow Control.

ϖNote: The 10-100 Ethernet - DES I/O card also has an AUX interface. This is a modem connection which should only be used in consultation with Compatible Systems Technical Support staff, who will provide instruction on its use.

ϖNote: If you want to use Telnet as a management method, you must first configure an IP address into the server using an out-of-band console, or reconfigure the IP address on an IP host or workstation on the same Ethernet segment as the server. See Chapter 4 - Command Line Preparation in the IntraPort Carrier Chassis section of the manual for more information.

Page 5 Page 7
Page 6
Image 6
Compatible Systems 10/100 manual Connecting a Management Console
Page 5 Page 7

10/100 specifications

Compatible Systems 10/100 is a technology designed for networking devices that allows for efficient data transmission at speeds of 10 megabits per second (Mbps) and 100 megabits per second. This dual capability enables seamless communication in various networking environments, accommodating both older devices that operate at 10 Mbps and newer devices that can utilize the faster 100 Mbps rate. The compatibility aspect is essential for mixed media and legacy systems, ensuring that organizations can transition to faster networks without obsolete older equipment.

One of the primary features of Compatible Systems 10/100 is its auto-negotiation capability. This technology automatically detects the highest possible speed supported by both the device and the network, allowing for optimal performance without manual configuration. This feature simplifies the setup process for users and reduces the potential for connectivity issues, making it ideal for businesses with diverse hardware.

Another critical characteristic of Compatible Systems 10/100 is its support for both Ethernet and Fast Ethernet standards. Ethernet operates at 10 Mbps, while Fast Ethernet, introduced in the mid-1990s, supports speeds of up to 100 Mbps. This flexibility means that organizations can implement a mixed environment while ensuring that they can leverage the benefits of higher-speed connections where necessary.

In terms of physical layer technology, Compatible Systems 10/100 typically employs twisted-pair cabling, following the Category 5 (Cat 5) standard or higher. This cabling supports higher frequencies and reduced crosstalk, enabling reliable data transmission across various distances. Ethernet over twisted pair is widely used due to its cost-effectiveness and ease of installation.

Additionally, the technology incorporates full-duplex communication capabilities, allowing for data transmission and reception simultaneously, effectively doubling the potential throughput without interference. This feature is particularly advantageous in busy network environments, ensuring that data packets can flow freely without congestion.

Overall, Compatible Systems 10/100 serves as a robust solution for organizations looking to maintain compatibility with legacy systems while incorporating the advancements of modern networking technologies. Its combination of auto-negotiation, support for multiple standards, and reliance on reliable cabling infrastructure allows businesses to scale their networks efficiently and effectively. As they move towards higher speeds and advanced technologies, the foundation provided by Compatible Systems 10/100 remains indispensable.