Compatible Systems 2250R manual IPX Protocol, Basic Configuration Guide, Suggested for IP

Chapter 6 - Basic Configuration Guide 29

Required for IP Unnumbered Interface

•IP unnumbered interface

•Point-to-Point Frame Relay

•Local DLCI

CV: Use the TCP/IP Routing: WAN Dialog Box.

TB: Use the configure command and the Numbered, PointToPoint- Frame, and InterfaceDLCI keywords in the IP WAN 0 (and/or any other port you wish to configure) section.

Suggested for IP

These parameters help supply information about the segment to which the interface is connected. With this information, routing can take place.

•Set IP RIP 1 or IP RIP 2

•Set IP static routes

CV: Use the TCP/IP Routing: WAN Dialog Box to set RIP, and the IP Static Routing Dialog Box (under Global/IP Static Routes) to set static routes.

TB: Use configure and set the RIPVersion keyword in the IP WAN 0 (and/or WAN 1) section. Add static routes and a default router using the edit config IP Static command.

IPX Protocol

Required for IPX

Frame Relay operation requires that the WAN interface is set to be a “numbered interface.” This means that the interface (and thus the Frame Relay network) must have an IPX network number.

•IPX numbered interface

•IPX Network Number

CV: Use the IPX Routing: WAN Dialog Box.

TB: Use configure and set the Numbered and Net keywords in the IPX WAN 0 (and/or WAN 1) section.

Suggested for IPX

The settings above are all that is generally required for IPX operation over Frame Relay.