Compatible Systems MicroRouter 2250R Switch Settings, Other Indicators on All LED Bars, Unused

38Appendix C - LED Patterns and Test Switch Settings

Other Indicators (on All LED Bars)

5,6 flashing: Router stacks starting up

3,4 & 7,8 flashing: No OS loaded. Running from ROM.

5,6 on solid, 2 (bars 1 & 3) and 9 (bars 2 & 4) flashing: Erasing OS in Flash ROM

4,5,6,7 on solid, 2 (bars 1 & 3) and 9 (bars 2 & 4) flashing: Erasing config in Flash ROM

Scanning from 2 to 9 (bars 1 & 3), and scanning from 9 to 2 (bars 2 & 4): Flash ROM erase due to switch setting five or six is complete. Set switch to zero and cycle power.

	Note: Any continuous flashing pattern not noted in this chapter may
be caused by a hardware failure. Please call Compatible Systems Tech-
nical Support if your router shows a hardware failure.
MicroRouter 2250R Switch Settings
0	Normal Operation
v1	Unused*
2	Unused*
3	Run Boot ROM Downloader

4 Unused*

5 Erase Flash ROM (OS and Configuration)

6 Erase Flash ROM (Configuration Only)

7 Unused*

8 Unused*

9 Allow letmein password for 5 minutes after powerup

Caution: Settings marked with an asterisk may erase your Flash MROM. Please do not use these settings without first contacting Compatible Systems Technical Support.