Chapter 6 - Basic Configuration Guide | 25 |
|
|
4. Set an IP Gateway for Ethernet 0.
IP Static Routes
To access the IP Static Routes dialog box, select IP Static Routes under Global in the Device View.
A.Click the Add... button. The Static Route dialog box will appear:
Dual Ethernet Static Route | Single Ethernet Static Route |
B.Click the IP Address radio button in the Gateway section. For dual Ethernet setups, enter the internal TCP/IP address of your firewall or proxy, whichever is applicable.
For single Ethernet setups, enter the internal TCP/IP address of your upstream Internet access/firewalling router.
In either case, this address must be on the same TCP/IP net- work as the Ethernet 0 address of the IntraPort 2/2+.