14 | Chapter 4 - CompatiView Software Installation |
|
|
which it should locate CompatiView and its associated files and data- base subdirectory.
Once the installation is complete,
ϖNote: For an
Transport Protocols and CompatiView
CompatiView will be able to use the transport protocol (IP or IPX) you have selected to access Compatible Systems products anywhere on your internetwork. Depending on your security setup, you may also be able to use the IP transport option to manage devices across the Internet.
The IP protocol does not provide a method for CompatiView to auto- matically discover the router. To initially contact the router over IP using CompatiView, you must first enter a valid IP address into the router. You can do this either on a console directly connected to the router or by setting a workstation’s IP address to 198.41.12.2 with a Class C subnet mask (255.255.255.0) so that it can communicate over Ethernet with 198.41.12.1 (the shipping default of Ethernet 0). After setting the router’s IP address, be sure to change the workstation’s configuration back to its original settings.
The IPX protocol does allow CompatiView to automatically discover the router. Compatible Systems devices are configured to autoseed the two most common IPX frame types upon startup (802.2 and 802.3 (raw)). If CompatiView has the IPX/SPX protocol selected as its trans- port, it will be necessary to either powerup the router before powering up the workstation, or reboot the workstation after the router has completed its boot sequence. This process will ensure that the worksta- tion and the router have the proper IPX network bindings for communi- cation.
