IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety pre- cautions should always be followed, including the following:

READ ALL INSTRUCTIONS

BEFORE USING.

KEEP AWAY FROM WATER

DANGER - Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

1.Always unplug appliance immediately after using.

2.Do not use while bathing.

3.Do not place or store appliance where it can fall or be pulled into a tub or sink.

4.Do not place in, or drop into, water or other liquid.

5.If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING - To reduce the risk of burns, electrocution, fire, or injury to persons:

1.This appliance should never be left unat- tended when plugged in.

2.Do not pull, twist, or wrap line cord around appliance.

3.This appliance should not be used by, on or near children or individuals with certain disabilities.

4.Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer.

5.Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped or dam- aged, or dropped into water. Return the appliance to an authorized service center for examination and repair.

6.Keep the cord away from heated surfaces.

7.Never use while sleeping.

8.Never drop or insert any object into any opening.

9.Do not use outdoors or operate where aero- sol (spray) products are being used or where oxygen is being administered.

10.Unit is hot when in use. Do not let heated surfaces touch eyes or bare skin.

11.Do not place the heated unit directly on any surface while it is hot or plugged in.

12.Never block the air openings of the appli- ance or place on a soft surface such as a bed or couch, where the air openings may be blocked. Keep the air opening free of lint and other debris.

13.Do not use an extension cord with this appliance.

14.Do not touch hot surfaces of the appliance. Use handles or knobs.

15.Before plugging in, read the information about dual voltage contained in the instruction section of this manual.

16.Do not attempt to touch the housing of your appliance near the straightening plates, as it is hot when in use.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This straightening iron is intended for house- hold use. Use on Alternating Current (50/60 hertz) only. This unit is designed to be oper- ated at 120/240 volts A/C.

DUAL VOLTAGE

This straightening iron will automatically adjust to the proper voltage. Use an adapter plug with correct configuration, prior to use in outlet.

TO STRAIGHTEN HAIR

Hair should be clean and completely dried before using the straightening iron. For best results, use a light styling product before blow- drying hair. Plug the iron into an electrical outlet. Turn on unit. The power indicator light should become illuminated. Allow unit to heat up for several minutes.

To turn off, press Power On/Off button (light will go off).

Never leave your straightener on and unat- tended. However, should you fail to turn the straightener off, it will shut itself off auto- matically within 60 minutes.

WARNING: The straightening iron's ceramic- coated plates will get very hot within a few seconds and should not be placed in contact with the skin after the straightening iron has been turned on.

GETTING STARTED

The iron’s 25 temperature settings and Instant Heat technology provide styling versatility for all hair types. If you have fine hair, a low temperature will provide the best results. If you have thick, wavy or hard-to- straighten hair, keep the heat setting on high. You can vary the iron’s temperature according to your particular need!

Temperature Setting Guide

 

TEMP. CONTROL

 

HAIR TYPE

 

 

 

 

Low 1-8

 

Delicate, thin, easy-to-straighten

 

 

 

 

 

 

Medium 9-14

 

Average to thick or treated hair

 

Med-High 15-20

 

Thick or wavy hair

 

 

High 21-25

 

Hard-to-straighten hair

 

 

Turbo Heat

 

Up to 20°C/68°F burst of heat

 

 

 

for difficult styling spots

Start with a hair section that is 2" wide and no more than 1/2" thick. Open the iron and place a hair section between the two hot plates, close to the scalp. Trap hair between the plates by firmly squeezing the handles together. While maintaining the tension, slowly pull the unit down along the hair section toward the end of hair. At the end of hair section, release the pressure on the handle and allow the hair section to slide out. Repeat process on additional sections of hair until you achieve the hair style you desire. It may be necessary to repeat pro- cess on certain areas, depending on the texture of your hair.

Some experience is necessary when learning to use this straightening iron. After using iron several times, you will learn the ideal way to straighten and style your hair easily.

For faster styling results, we have added a unique optional Turbo Heat on/off feature. Press the Turbo button to deliver up to 20°C/68°F more heat in the highest setting, for maximum styling performance.

REMOVABLE COMB

Your straightening iron includes a removable comb attachment. The comb will help to pro- vide tension and guide your hair as you use the straightening iron. Be sure to turn iron off and allow it to cool before removing or attach- ing the comb. To remove it, hold the iron firmly with one hand; with your other hand, slide comb away from the iron. When replacing the comb, align the comb with the slot on the side of the iron and slide comb into position. Make sure the comb locks securely into position.

STYLING WITH THE NEW SATIN FINISH® EASY-GLIDE CERAMIC-COATED PLATES

The plates of your new straightening iron have a Satin Finish® Easy-Glide ceramic- coated surface, the newest technology. This means your hair will glide easily over the surface of the plates as you’re straightening. The ceramic-coated surface helps smooth down flyaways and frizzies. It evenly distrib- utes heat so that the style you create has a salon-perfect, silky smooth, shining finish. Hair also slips right through the plates after it’s straightened. Styling product residue is simple to clean off ceramic-coated plates.

The new ceramic technology is a pleasure to work with and makes styling your hair easier and the results more professional.

USING INSTANT HEAT, THE 25 VARIABLE

TEMPERATURE SETTINGS AND

UNIFORM HEAT RECOVERY SYSTEM

This styling iron features Conair’s Instant Heat technology. This Instant Heat technology has 25 variable temperature settings. Every type of hair, from the finest to the curliest and most resistant, has a temperature range that’s gentle and safe for it and helps you create the look you want. And that’s not all. Conair’s professional salon standards of engineering provide you with a Uniform Heat Recovery System that maintains the iron at constant temperatures. There is a constant flow of power to ensure that heat is con- tinuously delivered for optimal styling results, unlike other units which lose heat during use. This provides consistent styling power so that every strand of your hair is set with the same level of heat and comes out the same way for a perfect finish.

Page 1
Image 1
Conair CS19JCS important safety instructions Read ALL Instructions Before Using, Dual Voltage, To Straighten Hair