Basic Features
Using Favorite Channels
(_ | MENU iTr] _ Channel |
Add to Favorite / Deletefrom Favorite
Set channels you watch frequently as
Favorites,
1.Select a channel and press the TOOLS button,
2.Add or delete a channel using the Add to Favorite or Delete from Favorite
menu respectively,
How to Stop Auto Programming
1.Press the ENTERIZ_ button.
2.A message will ask Stop Auto Program? Select Yes by pressing the _1or I_ button.
3.Press the ENTERIZ_ button.
Editing channels
[_ | MENU iTr] |
Channel Name Edit
1.Select a channel and press the TOOLS button,
2.Edit the channel name using the Channel Name Edit menu,
IIChannel Name Edit (analog channels only): Assign your own channel name,
Other Features
[_ IMENurm _ Channel _ EN°'(°ERI__
Clear Scrambled Channel
Memorizing channels
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
(_ | MENUE]] _ Channel | How to Stop Searching Scrambled Channels | |
|
| ||
|
| 1. | Press the ENTERIZ_ button to select Stop. |
|
| 2. | Press the _1 button to select Yes. |
Antenna (Air / Cable) _ .................................
3. Press the ENTERIZ_ button.
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i,e. an Air or a Cable system).
Auto Program
II Air: Air antenna signal,
IICable: Cable antenna signal. II Auto: Air and Cable antenna.
NOTE
This function is only available in Cable mode.
When selecting the Cable TV system: Selects the cable system. STD, HRC and mRCidentify various types of cable TV systems. Contact your local cable company to identify the type of cable system that
exists in your particular area. At this point, the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels. The Auto Program menu then reappears.
